AMF Bruns – Swivel Lift BSL 350

Description

• The BSL 350 is operating successfully in innumerable vehicles in Germany and abroad for more than 30 years now.
• Lift can be swivelled 2 x 90 degrees.
• Platform can be accessed directly from pavement.
• Minimum space requirement behind the vehicle. Easy to swivel in and out even under narrow traffic conditions.
• Lifting and lowering operations are carried out averted to the vehicle’s rear edge to prevent foot entrapment.
• Due to it’s compact construction, the BSL 350 does only need minimum space in the passenger cabin whilst in non-operating state.
• Two roll-off stops and handrails ensure safe lifting and lowering operation.
• Robust, bearing-supported lifting unit; absolutely maintenance free as well as weather-proof for maximum lifetime.
• An additional lift locking device at the vehicle floor ensures rattle-free driving.
• Manual pump for emergency operation.
• Hydraulic power pack integrated in lifting unit – no additional space loss in the passenger cabin.
• Easy to install
• Meets EN 1756, II
• EMC tested according to EU-regulation 95/54/EG/EC

The Swivel Lift BSL 350 is available for the following vehicles:

Citroen Jumper, Fiat Ducato, Ford Transit, Merecedes-Benz Sprinter, Nissan Interstar, Opel Movano, Peugeot Boxer, Renault Master, Volkswagen Crafter.

Technical Data:

– SWL 350kg

– Platform Size

– Approx 950 x 1.200mm

– Unladen weight – Approx. 150kg

– Lifting – Approx. 10 seconds.

– Lowering – Approx. 8 seconds.

– Control by push buttons.

– Lowering operation by unladen weight.

– Lifting operation – hydraulic power pack.

– Power – Electro-hydraulic from battery, 12v; strong, low-noise power pack integrated in lifting unit.

– Swivel devices – dust-proof enclosed; splash proof; with roller bearings and permanently lubricated.

– Lifting unit – maintenance-free roller-guides – no sliding friction.

This product is not available to purchase online. Please contact the office for more information.